Consorb - DC units

More traditional system commonly used by other manufacturers because of its simplicity. This principle is best used at lower regeneration temperatures - typically where waste heat is available. Also suitable for use where the air inlet moisture content is very high.

Recusorb - R & RZ units

Complete with internal heat recovery to improve efficiency. Heat gained by the rotor during regeneration is transferred to the incoming regeneration air. The process air outlet is therefore both cooler and drier than with other desiccant dryers. Most of our dehumidifiers operate on this principle.

Econosorb - EF units

Combines the best of heat pump and desiccant technologies to produce the most energy-efficient dehumidifier available. Uses around 25% of the energy of a standard desiccant dehumidifier.

Frigosorb - DF units

Patented by DST, this system is used where it is impractical to duct out the wet air. Utilising heat pump principles, energy consumption is around 35% of a standard desiccant dehumidifier.