Injection and blow moulding operations utilise thermoplastics which are heated to plasticity and shaped into forms using a mould. During this process, if moisture is present in the raw material it boils, releasing vapour that can cause both structural and cosmetic imperfections to the finished product.
To ensure that the end product is defect free, raw materials must be free of moisture before being processed. Many of today’s plastic resins are hygroscopic (high affinity for absorbing moisture).
To reduce forming time and increase production volumes, the majority of systems employ the use of chilled water to reduce the mould temperature. Generally, the cooler the mould, the faster the process cycle. However, operating at low mould temperatures will create problems with condensation, especially in summer. This can result in unacceptable water marks on the product as well as corrosion of expensive moulds and guide pins, necessitating repair or replacement.