Flexisorb Dehumidification Systems

Bespoke Dehumidification Systems

Flexisorb enables each industrial dehumidification system to be tailored to suit individual requirements.

Using our standard D-Max silica gel rotor, dew points as low as minus 60°C are easily achieved in a single pass. Lower dew points can be achieved using our SZCR Zeolite rotor.

We offer everything from basic desiccant dehumidification to a complete climatic control system.

With total flexibility in design, these highly efficient industrial atmospheric air dryers are structured around the rotor to conform precisely to our customers’ specifications.

Dehumidification of air is the prime objective of a Flexisorb system.

To improve the overall efficiency of the drying system, pre-cooling of incoming fresh air is often required. Additional post heating and post cooling can also be included for close control of the supply dry air temperature.

With available process air flows up to 60,000 m³/h, the Flexisorb system offers one of the most versatile air drying systems available today.

    Energy-efficient and environmentally friendly

    All Flexisorb dehumidifiers are designed to be energy efficient and environmentally friendly. Regeneration heaters are available for use with natural gas, LPG, steam, hot water and electric – or a combination of two.

      The D-Max Silica Gel rotor

      The D-Max high capacity adsorption rotor is at the heart of every DST dehumidifier.

      Our silica gel rotors have been a leading light in the field of adsorption technology for many years and offers numerous advantages:- high efficiency, washable, bacteriostatic, non-flammable, non toxic, environmentally friendly, long service life, high dehumidification capacity & no particulate carry-over.

        Optimised control

        All Flexisorb dehumidifiers are designed to be energy efficient and environmentally friendly. Regeneration heaters are available for use with natural gas, LPG, steam, hot water and electric – or a combination of two.

          One unit – one supplier

          We provide the complete solution as a “plug & play” unit. This simplifies delivery, reduces installation time and eliminates potential demarcation problems at commissioning stage.

            Recusorb RF

            RF ModelMinimum Airflow m³/hMaximum Airflow m³/hDrying Capacity kg/h *
            RF 0819005,00018
            RF 1011,5007,00030
            RF 1023,0009,70048
            RF 1224,80015,60075
            RF 1527,60024,800120
            RF 1729,70031,500162
            RF 19212,00039,900200
            RF 22216,00051,300260
            RF 24219,00061,000310
            * Moisture removed by desiccant rotor only (litres/hour) at nominal airflow
            * Process and reactivation air inlets at 20°C, 60%RH, 8.7 g/kg

            Consorb CF

            CF ModelMinimum Airflow m³/hMaximum Airflow m³/hDrying Capacity kg/h *
            CF 0811000450018
            CF 1012000700033
            CF 1023700970052
            CF 12260001560083
            CF 152950024800143
            CF 1721200031500175
            CF 1921500039900225
            CF 2221900051300290
            CF 2422300061000345
            * Moisture removed by desiccant rotor only (litres/hour) at nominal airflow
            * Process air inlet at 10°C, 100%RH, 7.6 g/kg; Reactivation inlet at 36°C, 60%RH, 23.0 g/kg

            Diagrams