Desiccant Dehumidifiers for Industry

The silica gel rotor from Seibu Giken

All DST desiccant dehumidifiers use the Seibu Giken Silica Gel Rotor as standard. In the Seibu Giken rotor the silica gel is chemically bonded to the structure. This means that there is no desiccant carry-over to the air. It also provides excellent reliability and longevity.

After 10 years of operation the Seibu Giken rotor retains more than 90% of its original capacity.

Another important feature is that the Seibu Giken rotor can be washed if it becomes contaminated. This is especially important for rotors working under harsh conditions.

Custom built Model RF102 dehumidification system with steam reactivation

Flexisorb (RF & CF) – Industrial Desiccant Dehumidification Systems

Developed to meet the varying needs of the process industry, the Flexisorb range offers a series of custom-built compact industrial dehumidification systems.

Designed around our desiccant rotor, units are configured as either ‘Recusorb’ or ‘Consorb’ principle, depending on the application. Dewpoints as low as minus 60°C can now be achieved in a single pass.

    RLZ & CZ – Industrial Desiccant Dehumidifier

    Industrial dehumidifier using desiccant technology for chemical, pharmaceutical and food manufacturing processes, large warehouses, cold stores, ice rinks and sports halls.

    Manufactured in Aluzinc, Recusorb RLZ units include internal heat recovery as standard. Consorb CZ Series are particularly suitable for deep drying applications.Units are available with electric, steam, direct fired gas or hot water reactivation heaters.

    As standard, all RLZ & CZ dehumidifiers are supplied with G4 air inlet filters, process and reactivation fans, reactivation heater, D-Max desiccant rotor, electric control panel and PLC C2 with fully integrated capacity control system.

      Desiccant Dehumidifier Model RLZ81R with electric reactivation

      Capacity control options:

      Two-step, multi-step binary or full PI linear control using either EH4, EH3 or an external BMS control signal.

      Other options available include:

      • Stainless steel chassis (S2333 or S2343)
      • Internal ‘Armaflex’ insulation (19 mm or 32 mm)
      • Fan motor frequency inverters
      • Inlet bag filters to F7
      • SSCR-H or SSCR-Cl rotor
      • PLC C4 with Modbus TCP/IP protocol

      R & RL Series Desiccant Dehumidifiers

      Mid-range industrial desiccant dehumidifiers for dry air storage, cold stores, sports halls, museums, clean rooms, pneumatic conveying and process air conditioning systems.

      Manufactured in 2333 stainless steel these units include internal heat recovery, electric reactivation and Auto/Manual mode switching.

      Pre-wired for for two 2 step binary control (from EH4 2 step controller) as standard, units are also available for linear capacity control (from EH3 PI controller or BMS control signal).

      The R Series is supplied with the high capacity D-Max ceramic-silica gel rotor, G4 panel filters, reactivation heater, process and reactivation fans and all essential controls. Also available with steam reactivation.

        DC & DR Series Desiccant Dehumidifiers

        Industrial desiccant dehumidifier range for the flood & water damage professional, temporary humidity control, museums, research laboratories, silo headspace conditioning, dry air stores and small production processes.

        Manufactured from 2333 stainless steel as standard, these industrial dehumidifiers are available in three configurations; Aquasorb (A30), Consorb (DC) and Recusorb (DR).

        All units include our high capacity D-Max ceramic silica gel rotor. On single phase units, reactivation heaters utilise positive temperature coefficient (PTC) thermistor technology and are self regulating for maximum safety and energy efficiency. Three phase units use resistive type heaters. All units include Auto-Manual mode switching and are pre-wired for simple humidistat connection via an Amphenol plug.

          Flex Industrial Desiccant Drying Systems

          Specifically designed to compliment the RLZ series, bolt on modules are available.

          Modules include:

          Pre-cooling & post-cooling (chilled water)
          Pre-heating & post heating (hot water & steam)
          Process fan – plug type, direct driven by 2-pole motor Filters to F7

          Manufactured using sturdy aluminium frames with double skin insulated Aluzinc panels with 50 mm fire resistant mineral wool (environmental class C4). Each module is supported independently on an Aluzinc frame.

          PDF Download

          Capacity: 0.85 – 1.55 kg/h
          Dry air flow: 330 – 370 m³/h

          Capacity: 0.35 – 0.4 kg/h
          Dry air flow: 65 – 90 m³/h

          Capacity: 0.5 kg/h
          Dry air flow: 120 m³/h

          Capacity: 0.5 kg/h
          Dry air flow: 190 m³/h

          Capacity: 0.5 kg/h
          Dry air flow: 190 m³/h

          Capacity: 0.6 kg/h
          Dry air flow: 190 m³/h

          Capacity: 0.8 kg/h
          Dry air flow: 330 m³/h

          Capacity: 1.1 kg/h
          Dry air flow: 310 m³/h

          Capacity: 1.1 kg/h
          Dry air flow: 360 m³/h

          Capacity: 1.3 kg/h
          Dry air flow: 400 m³/h

          Capacity: 1.5 kg/h
          Dry air flow: 400 m³/h

          Capacity: 1.6 kg/h
          Dry air flow: 310 m³/h

          Capacity: 1.4 kg/h
          Dry air flow: 300 m³/h

          Capacity: 2.1 kg/h
          Dry air flow: 490 m³/h

          Capacity: 1.6 kg/h
          Dry air flow: 600 m³/h

          Capacity: 2.3 kg/h
          Dry air flow: 550 m³/h

          Capacity: 2.8 kg/h
          Dry air flow: 600 m³/h

          Capacity: 3.0 kg/h
          Dry air flow: 550 m³/h

          Capacity: 4.0 – 5.0 kg/h
          Dry air flow: 850 – 1,000 m³/h

          Capacity: 7.3 – 10.0 kg/h
          Dry air flow: 1,250 – 1,450 m³/h

          Capacity: 7.5 – 11.5 kg/h
          Dry air flow: 1,300 – 2,100m³/h

          Capacity: 13.0 – 17.0 kg/h
          Dry air flow: 2,500 – 3,200 m³/h

          Capacity: 19.0 – 70.0 kg/h
          Dry air flow: 2,900 – 10,500 m³/h

          Capacity: 20.0 – 54.0 kg/h
          Dry air flow: 4,500 – 12,000 m³/h

          Capacity: 22.0 – 65.0 kg/h
          Dry air flow: 3,200 – 8,000 m³/h

          Capacity: 19.0 – 50.0 kg/h
          Dry air flow: 3,200 – 7,200 m³/h

          Capacity: 23.5 – 69.0 kg/h
          Dry air flow: 8,000 – 12,000 m³/h

          Electronic Humidistat
          and PI Controller

          Electronic Humidistat
          Wall mounted & Duct mounted Sensors

          Air Cooled Condenser – Option for Model RL60R, RL60LR & RL61R/S

          Air flow:
          200 – 400 m³/h